Thunderbird V8-302 5.0L HO (1992)
1.
Grasp the belt tongue and pull down on the belt webbing closest to you to form a loop through the upper (narrow and longer) slot in the tongue.
See the left side of Figure 3.
2.
Working within the upper slot, rotate and fold the belt webbing over itself as required to remove the twist.
3.
Pull the excess belt webbing back through the upper slot in the tongue.
4.
Repeat the above steps to complete the removal of the twist at the lower (wider and larger) slot in the tongue. See the right side of Figure 3.